Usage of the metal roof is increasing everyday and with this popularity, more and more home-owners want to install their roofs themselves. This can both be a good and a bad choice. If you are good at construction and you have a little background, you can surely do this job but if you are a novice in this work, you can even end up busting your whole investment. Therefore this process is not worth taking chances. Do it if you know you can do this.
Now that you are going to get your own roof installed, you need some proper methods and the appropriate tools. Even professionals don't take the roofing project if they are not qualified for some specific type of the roofing. Many companies conduct the training for their proper roofing solution with the right tools required.
Metal Cutting
All the metal roofing tools are not same; they are different from one brand to another therefore be sure to get all the tools from the same brand so that there are no confusion later on. There are manuals provided with all the tools and supplies which demonstrate the precise usage of a specific tool.
Usage of Different Tools in Installation Process
There are many phases involved in the installation of a metal roof; different tools are used in every phase. Like when metal sheets are being cut, a proper metal cutter and the measuring tape is required so that you can accurately cut the metal.
When joining the different sheets the proper bolts and nuts should be used after the precise interval on the sheets. Sometime metal needs to be bent before fitting on the roof, proper tool is to be used for this purpose so that metal is bent as required and you do not inflict any damage to it.
Metal roofs have so much variety to choose from, tools change as we move form one metal to other and also the material changes as different materials are used for different metals. Materials also depend on the weather conditions in which the roof is going to be installed.
There are some tools which are necessary for the worker who is set to install the roof like proper foot-wear which does not slip as some roofs have steep slopes, and rope belts because the worker has to work on the roof where there is always danger to fall off.
Wise Decision
It is always a wise decision to leave this work to the professionals as there can be a lot of complications in the installation process and using the tools. The complication of your building requirements may require some tools which are not commonly available or they are too expensive to buy. In all these cases this work should be left to a professional contractor. Always use the safety guidelines when using a tool as some tools can be dangerously harmful if not used wisely.
Christmas Sales Malco TS1 Turbo Shear 20 Gauge Capacity Sheet Metal Cutting Attachment for 3/8-Inch Drills 201
Dec 14, 2011 02:27:55
Click for larger image and other views
Christmas Sales Malco TS1 Turbo Shear 20 Gauge Capacity Sheet Metal Cutting Attachment for 3/8-Inch Drills Feature
- Converts your power drill to a power shears
- Makes fast cuts in sheet metal
- 20-gauge capacity in galvanized steel
- Makes short work of long rip cuts in metal roofing or building panels
- Inserts into any 3/8-inch chuck drill
Christmas Sales Malco TS1 Turbo Shear 20 Gauge Capacity Sheet Metal Cutting Attachment for 3/8-Inch Drills Overview
MALCO HANDHELD TURBO SHEAR Attaches to a standard 1200 rpm A/C or cordless drill to create a power shear Cuts straight and to the left in heavy 20 gauge galvanized steel Use on ferrous and non- ferrous sheet metal, metal roofing, vinyl, steel mesh, ductwork and furnace jackets ClamshellChristmas Sales Malco TS1 Turbo Shear 20 Gauge Capacity Sheet Metal Cutting Attachment for 3/8-Inch Drills Specifications
The Malco TurboShear convert your power drill to a power shears. To operate this time-saving tool, simply insert the TurboShear directly into any 3/8-inch chuck of a standard 1,200 RPM A/C or cordless drill. This rugged but inexpressive accessory cuts straight and to the left. It makes fast cuts in sheet metal and is capable of navigating tight curved patterns and squares in heavy 20-gauge galvanized steel. Blind cuts require only a 1/2-inch starting hole. Cutting applications include both ferrous and non-ferrous sheet metals, metal roofing/building panels, vinyl, steel mesh, duct work, even the thick metal of furnace jackets, equipment enclosures or automotive body panels. An offset design keeps both hands away from work surface. The long-wearing hardened jaws are also replaceable.SAVE NOW on Christmas Sales Offers below!
Available In Stock. |
| This Christmas Malco TS1 Turbo Shear 20 Gauge Capacity Sheet Metal Cutting Attachment for 3/8-Inch Drills ships for FREE with Super Saver Shipping. |
Price : Click to Check Update Prices Please. |
