5 Metal Roofing Advantages and 5 Disadvantages

When putting a roof on a building, the choice of roofing system for the building can often make a large difference in the energy efficiency and durability. Overall, the choice of roof construction can greatly affect the costs both during construction and over the long term life of the roof.

Metal Cutting

Here are 5 advantages to metal roofing:
A metal roof is very lightweight in comparison to other choices. There is a very high strength to weight ratio in metal roofs. Because of this, very large roofs can be constructed out of metal, sometimes going over 20,000 square feet of steel sheeting for a single building. Has a good "green" factor with a good efficiency with heat using cool-roof paints and a high level of emissivity, as well as being open to recycling. For example, producing a fully recycled aluminum roof only requires 5% of the energy than it does to produce a completely new roof. Because of this, metal construction products for roofing are readily available with a high level of recycled content. Very resistant to weather effects, including fire, hail, and wind. Also durable towards aging, which means these roofs often come with a lifetime replacement warranty. The lifespan of a standard residential/commercial grade metal roof is 50 to 100 or more years, depending on the type of metal used. Little to no maintenance required.

Metal Cutting

There are also downsides to using metal roofing, although not too many. Here are 5 disadvantages to metal roofing:
With large roofs, thermal movement must be taken into consideration during installation. If done properly, though, it's a one-time concern. Change in temperature can cause roofing noise in some cases, although this is rather rare. Certain combinations of metals can cause accelerated corrosion in the metal. Again, if done properly, it is a one-time concern. Production of metal components is expensive for both money and energy, although recycling can cut these costs immensely. Transportation of metal components may require additional travel during construction, increasing some costs.

So take precaution when choosing what style of roof to be put into a building construction. If the benefits of metal roofing are best for your project, it may be your best choice.

5 Metal Roofing Advantages and 5 Disadvantages
Metal Cutting

Special Price!!! Milwaukee 6370-20 13 Amp 8-Inch Metal Cutting Circular Saw

Oct 30, 2011 19:44:30

Milwaukee 6370-20 13 Amp 8-Inch Metal Cutting Circular Saw
Click for larger image and other views

Milwaukee 6370-20 13 Amp 8-Inch Metal Cutting Circular Saw

>> Click here to update Cheapest prices for Milwaukee 6370-20 13 Amp 8-Inch Metal Cutting Circular Saw <<

Milwaukee 6370-20 13 Amp 8-Inch Metal Cutting Circular Saw Feature

  • Dry-cut technology provides faster, cleaner, more affordable metal cutting
  • Durable blade shield with integral chiptank deflects/collects hot chips and sparks
  • Plunge lever for fast, effective plunge cuts
  • Exclusive quick-release shield latch for fast waste disposal and blade changes
  • Full Two Year Warranty


Milwaukee 6370-20 13 Amp 8-Inch Metal Cutting Circular Saw Overview

6370-20 Model Code: AB (part# 6370-20) This item features: -Durable magnesium blade shield deflects hot metal chips and sparks. -Integral chip tank efficiently collects waste for easy clean-up. -Depth of cut is for one-pass through most metal stud, grating, panel, and decking. -Exclusive quick-release blade shield latch for convenient chip disposal and blade changes. -Convenient guard retraction lever for plunge cuts. -Blade Diam: 8 in. -Arbor Diam: 5/8 in. -Voltage: 120.00 VAC. -Amps: 13.00 A. -Speed: 3700 rpm [Max]. -Cutting Depth: 2 9/16 in [Max]. -Wt.: 13.30 lb. -Price is for 1 Each. Model Code  Model Description AAIncludes:Carbide Tipped Metal Cutting Blade, Carrying Case, Hex Blade Wrench ABIncludes:Carbide Tipped Metal Cutting Blade, Hex Blade Wrench



SAVE NOW on the special offers below!

Available In Stock.

This Milwaukee 6370-20 13 Amp 8-Inch Metal Cutting Circular Saw ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Milwaukee 6370-20 13 Amp 8-Inch Metal Cutting Circular Saw

Limited Offer Today!! Milwaukee 6370-20 13 Amp 8-Inch Metal Cutting Circular Saw Black Friday and Cyber Monday Deals

Silver Soldering 37 In Hdtv

LENOX 20564-614R 6" 14TPI Metal Cutting Reciprocating Saw Blade - 5 Pack

Special Price!!! LENOX 20564-614R 6" 14TPI Metal Cutting Reciprocating Saw Blade - 5 Pack

Oct 29, 2011 02:16:08

LENOX 20564-614R 6
Click for larger image and other views

LENOX 20564-614R 6

>> Click here to update Cheapest prices for LENOX 20564-614R 6" 14TPI Metal Cutting Reciprocating Saw Blade - 5 Pack <<

LENOX 20564-614R 6" 14TPI Metal Cutting Reciprocating Saw Blade - 5 Pack Feature

  • Bi-Metal construction
  • Precision milled teeth
  • Shatterproof; shock resistant teeth
  • High heat and wear resistance
  • Increases productivity


LENOX 20564-614R 6" 14TPI Metal Cutting Reciprocating Saw Blade - 5 Pack Overview

Sharp tough bimetal blades. Will not shatter. Easily cuts steel, stainless steel, nail embedded wood, hardwood flooring, reinforced bar, conduit, cast iron, and pipe. Standard 1 2" shank. Model No. S318RC thru S110R have 1 blade per card and model No. 456



SAVE NOW on the special offers below!

Available In Stock.

This LENOX 20564-614R 6" 14TPI Metal Cutting Reciprocating Saw Blade - 5 Pack ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

LENOX 20564-614R 6

Limited Offer Today!! LENOX 20564-614R 6" 14TPI Metal Cutting Reciprocating Saw Blade - 5 Pack Black Friday and Cyber Monday Deals

Weight Loss Diet Food

Makita A-90532 12-Inch 60-Teeth Dry Ferrous Metal Cutting Saw Blade with 1-Inch Arbor

Special Price!!! Makita A-90532 12-Inch 60-Teeth Dry Ferrous Metal Cutting Saw Blade with 1-Inch Arbor

Oct 27, 2011 19:01:08

Makita A-90532 12-Inch 60-Teeth Dry Ferrous Metal Cutting Saw Blade with 1-Inch Arbor
Click for larger image and other views

Makita A-90532 12-Inch 60-Teeth Dry Ferrous Metal Cutting Saw Blade with 1-Inch Arbor

>> Click here to update Cheapest prices for Makita A-90532 12-Inch 60-Teeth Dry Ferrous Metal Cutting Saw Blade with 1-Inch Arbor <<

Makita A-90532 12-Inch 60-Teeth Dry Ferrous Metal Cutting Saw Blade with 1-Inch Arbor Feature

  • Fits Makita model LC1230 metal cutting saw


Makita A-90532 12-Inch 60-Teeth Dry Ferrous Metal Cutting Saw Blade with 1-Inch Arbor Overview

Eagerly tackles the toughest jobs. Blade Diameter (in.): 12, Recommended Use: Black and cast iron pipe, tubing, conduit, threaded rod, angle iron, channel, UNISTRUT , Blade Use: Dry, Blades (qty.): 1



SAVE NOW on the special offers below!

Available In Stock.

This Makita A-90532 12-Inch 60-Teeth Dry Ferrous Metal Cutting Saw Blade with 1-Inch Arbor ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Makita A-90532 12-Inch 60-Teeth Dry Ferrous Metal Cutting Saw Blade with 1-Inch Arbor

Limited Offer Today!! Makita A-90532 12-Inch 60-Teeth Dry Ferrous Metal Cutting Saw Blade with 1-Inch Arbor Black Friday and Cyber Monday Deals

Lcd 40 Samsung

LENOX Gold 418G - 4" 18TPI Titanium Edge Metal Cutting Reciprocating Blade - 5 Pack

Special Price!!! LENOX Gold 418G - 4" 18TPI Titanium Edge Metal Cutting Reciprocating Blade - 5 Pack

Oct 26, 2011 17:21:07

LENOX Gold 418G - 4
Click for larger image and other views

LENOX Gold 418G - 4

>> Click here to update Cheapest prices for LENOX Gold 418G - 4" 18TPI Titanium Edge Metal Cutting Reciprocating Blade - 5 Pack <<

LENOX Gold 418G - 4" 18TPI Titanium Edge Metal Cutting Reciprocating Blade - 5 Pack Feature

  • Specifically designed to cut metal
  • Titanium Edge improves blade's life
  • Bi-Metal Construction
  • Shatter Resistant
  • Cuts Faster


LENOX Gold 418G - 4" 18TPI Titanium Edge Metal Cutting Reciprocating Blade - 5 Pack Overview

Lenox Gold 418G - 4" 18TPI Titanium Edge Metal Cutting Reciprocating Blade - 5 Pack has specially formulated Titanium edge which improves the wear resistance of the teeth for faster cuts through the blade's life. The bi-metal technology flexes, resists breaking and also extends the life of the blade. The reinforced tooth design and Titanium coating combine to create the longest lasting blade, ever.



SAVE NOW on the special offers below!

Available In Stock.

This LENOX Gold 418G - 4" 18TPI Titanium Edge Metal Cutting Reciprocating Blade - 5 Pack ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

LENOX Gold 418G - 4

Limited Offer Today!! LENOX Gold 418G - 4" 18TPI Titanium Edge Metal Cutting Reciprocating Blade - 5 Pack Black Friday and Cyber Monday Deals

Tivo Wireless Network Adapter

Irwin Industrial Tools 4935560 7-1/4-Inch 68-Tooth Metal Cutting Circular Saw Blade for Thin Steel

Special Price!!! Irwin Industrial Tools 4935560 7-1/4-Inch 68-Tooth Metal Cutting Circular Saw Blade for Thin Steel

Oct 25, 2011 07:31:16

Irwin Industrial Tools 4935560 7-1/4-Inch 68-Tooth Metal Cutting Circular Saw Blade for Thin Steel
Click for larger image and other views

Irwin Industrial Tools 4935560 7-1/4-Inch 68-Tooth Metal Cutting Circular Saw Blade for Thin Steel

>> Click here to update Cheapest prices for Irwin Industrial Tools 4935560 7-1/4-Inch 68-Tooth Metal Cutting Circular Saw Blade for Thin Steel <<

Irwin Industrial Tools 4935560 7-1/4-Inch 68-Tooth Metal Cutting Circular Saw Blade for Thin Steel Feature

  • Metal Cutting Grade Carbide Tooth reduces wear, withstands impact & delivers longer life
  • Laser Cut Blade provides for stronger tooth bond
  • Laser Cut Anti-Vibration Vents that stabilizes the blade and keeps it cool for smooth & accurate cuts
  • Anti Kick Back Shoulder reduces dust & sparks for safer cuts


Irwin Industrial Tools 4935560 7-1/4-Inch 68-Tooth Metal Cutting Circular Saw Blade for Thin Steel Overview

The durable metal cutting carbide tips are designed for a smooth and fast cut. These blades are designed to reduce wear, withstand impacts, and provide longer life. The blade is stabilized for smooth and accurate cuts and it's anti kickback design reduces dust and sparks for a safer cut. This blade is ideal for the professional who is looking for a blade to provide them with their metal cutting needs. No. 4935555: 7-1/4" 48T ferrous steel 5/8" arbor No. 4935560: 7-1/4" 68T thin steel, 5/8" arbor No. 4935557: 8" 50T ferrous steel 5/8" arbor No. 4935561: 10" 80T thin steel 5/8" arbor No. 4935559: 14" 80T ferrous steel 1" arbor



SAVE NOW on the special offers below!

Available In Stock.

This Irwin Industrial Tools 4935560 7-1/4-Inch 68-Tooth Metal Cutting Circular Saw Blade for Thin Steel ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Irwin Industrial Tools 4935560 7-1/4-Inch 68-Tooth Metal Cutting Circular Saw Blade for Thin Steel

Limited Offer Today!! Irwin Industrial Tools 4935560 7-1/4-Inch 68-Tooth Metal Cutting Circular Saw Blade for Thin Steel Black Friday and Cyber Monday Deals

Scariest Halloween Masks

How to Make Cutting Mild Steel Round Easier

You should know that cutting mild steel round is a very simple procedure to do. There are already so many different methods that make cutting mild steel round rather easy and all you have to do is make a choice among the different methods, and you can start working.

Metal Cutting

Waterjet Cutting is another method of cutting through steel flat a several other types of steel products. It works by using extreme water pressure of about 33,000 - 75,000 PSI and a collection of abrasives made of different sizes of rocks, garnet, to cut through steel. They can cut through about six inches of metal and tolerate about +/- 0.003 inches, and it can cut through metal and even ceramic. The only disadvantage is that it follows quite a slow process; so if you are requiring fast cutting, then you definitely should not opt for a waterjet cutting at all.

Metal Cutting

Plasma Cutting uses extreme temperature to be able to pass electricity and work on the metal. Very high temperature melts the metal in smaller particles and it does a very efficient job with the use of a combination of gases and electricity. This is probably the fastest method of cutting and it can really cut through even the thickest kinds of metal.

The next method is Laser Cutting and it uses ultraviolet light to vaporize metal to be able to cut it. It is quite modern and they can tolerate about 0.0005 inches at a time. It is very fast and very precise and is known to be the most professional method of cutting through steel flat and all other types of very thin steel products. If you are doing an intricate design on steel, like in decorating, laser cutting is the method you need because it is very precise and accurate. Some of the very powerful lasers can cut through steel that are as thick as 1.35 inches and it does this successful job by the combination of gases and electricity.

Another method that is becoming popular nowadays is cutting by use of power tools. These power tools can be cordless for allow ease of use or they can come with cord, if you want it to be more powerful. These power tools can efficiently cut through steel and they are powerful enough to go through very thick types of metal.

Cordless power tools are fixed with a circular saw that have carbide tips that make them strong enough to cut through all kinds of steel. They run at very impressive levels of rpm and they come complete with a guard so that you are protected from metal shavings that come apart while you are cutting through the metal.

They have very thick aluminum blades that can sometimes come in copper form, and they are available in different brands, so you just need to take your pick.

All these different methods can cut through steel efficiently, all you need to consider is what kind of cutting you need and what type of steel you are trying to cut. Like for instance, if you are trying to cut through metal that is about 1-inch thick or eve less, then you are safe with laser cutting. If you are cutting through something less tolerant, however, you will probably need waterjet cutting to do the job. Finally, if you need to cut through a rather thick type of metal, you need opt for Plasma cutting, instead.

How to Make Cutting Mild Steel Round Easier
Metal Cutting

Special Price!!! Freud D1080N Diablo 10-Inch 80 Tooth TCG Non-Ferrous Metal and Plastic Cutting Saw Blade with 5/8-Inch Arbor and PermaShield Coating

Oct 24, 2011 04:13:28

Freud D1080N Diablo 10-Inch 80 Tooth TCG Non-Ferrous Metal and Plastic Cutting Saw Blade with 5/8-Inch Arbor and PermaShield Coating
Click for larger image and other views

Freud D1080N Diablo 10-Inch 80 Tooth TCG Non-Ferrous Metal and Plastic Cutting Saw Blade with 5/8-Inch Arbor and PermaShield Coating

>> Click here to update Cheapest prices for Freud D1080N Diablo 10-Inch 80 Tooth TCG Non-Ferrous Metal and Plastic Cutting Saw Blade with 5/8-Inch Arbor and PermaShield Coating <<

Freud D1080N Diablo 10-Inch 80 Tooth TCG Non-Ferrous Metal and Plastic Cutting Saw Blade with 5/8-Inch Arbor and PermaShield Coating Feature

  • Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp
  • Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight
  • Durable micrograin titanium carbide for extreme durability, razor-sharp cuts, and long life
  • Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability
  • Laser cut arbor for accurate blade rotation reducing vibration and premature wear


Freud D1080N Diablo 10-Inch 80 Tooth TCG Non-Ferrous Metal and Plastic Cutting Saw Blade with 5/8-Inch Arbor and PermaShield Coating Overview

Freud D1080N 10" 80T Diablo Non-Ferrous & Plastic Table/Miter Saw Blade These thin kerf blades have a Triple Chip Grind (TCG) Tooth Design for long life and a clean, burr-free finish. Diabloâs unique anti-vibration design and precision-tensioned steel plate provide critical protection against vibration, allowing these blades to cut smoother and quieter.Freud D1080N 10" 80T Diablo Non-Ferrous & Plastic Table/Miter Saw Blade Features:; Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp; Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight; Durable micrograin titanium carbide for extreme durability, razor-sharp cuts, and long life; Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability; Laser cut arbor for accurate blade rotation reducing vibration and premature wear; Table saw/slide miter blade ; Great for non-ferrous/plastic work ; Super thin laser cut kerf ; Perms-SHIELD non-stick coating ; TiCo Hi-density Carbide blade ; 12,000 maximum RPM ; 5/8" arbor ; 80 teeth ; 10" blade diameter ; Carded

Freud D1080N Diablo 10-Inch 80 Tooth TCG Non-Ferrous Metal and Plastic Cutting Saw Blade with 5/8-Inch Arbor and PermaShield Coating Specifications

For a high-impact blade that makes clean cuts in plastics and non-ferrous metals, look no further than the Freud D1080N Diablo 10-Inch Non-Ferrous Metals and Plastics Saw Blade. Thanks to its proprietary TCG (triple-chip grind) teeth, this is your go-to blade for slicing through plastic structures and non-ferrous metals such as copper pipes, aluminum extrusions, and brass plates.




Model #D1080N
Diameter10"
Machine UseMiter/Slide Miter Saw, Table Saw
ApplicationNon-Ferrous Metals/Plastics
Teeth80 TCG
(Triple-Chip Grind)
Arbor5/8"
Kerf.094"
Hook Angle-5°
Makes Clean, Razor-Sharp Cuts in Plastic and Non-Ferrous Metals
Achieving premium results when working with plastics and non-ferrous metals is all about clean, accurate cuts. The Freud D1080N makes this process easy, fast, and precise. Constructed for making flawless crosscuts, this blade's proprietary TCG (triple-chip grind) teeth leave a clean, burr-free finish.

Contractors, construction workers, and avid do-it-yourselfers will want to keep this blade on hand for jobs that call for slicing through plastic structures and non-ferrous metal pipes, extrusions, and plates. Appropriate application materials include copper, aluminum, brass, and plastic.

Produces Smooth, Quiet Cuts with Laser-Cut Kerf
The Freud D1080N's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.094-inch kerf between the blade's 80 TCG (triple-chip grind) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.

An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade's cutting life.

Features Shock-Resistant Carbide for Long-Lasting Precision
So you can count on it over the long term, the Freud D1080N is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion.

Fits Miter and Table Saws
The Freud D1080N is a great addition to your workshop because it's designed with the versatility to fit a variety of table saws and miter saws, including sliding miter saws.

This product is covered by Freud's Limited Lifetime Warranty.

What's in the Box
Freud D1080N Diablo 10-Inch Non-Ferrous Metals and Plastics Saw Blade.


SAVE NOW on the special offers below!

Available In Stock.

This Freud D1080N Diablo 10-Inch 80 Tooth TCG Non-Ferrous Metal and Plastic Cutting Saw Blade with 5/8-Inch Arbor and PermaShield Coating ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Freud D1080N Diablo 10-Inch 80 Tooth TCG Non-Ferrous Metal and Plastic Cutting Saw Blade with 5/8-Inch Arbor and PermaShield Coating

Limited Offer Today!! Freud D1080N Diablo 10-Inch 80 Tooth TCG Non-Ferrous Metal and Plastic Cutting Saw Blade with 5/8-Inch Arbor and PermaShield Coating Black Friday and Cyber Monday Deals

Hakko Soldering

LENOX Gold 9118G - 9" 18TPI Titanium Edge LAZER Heavy Metal Cutting Reciprocating Blade - 5 Pack

Special Price!!! LENOX Gold 9118G - 9" 18TPI Titanium Edge LAZER Heavy Metal Cutting Reciprocating Blade - 5 Pack

Oct 23, 2011 07:36:33

LENOX Gold 9118G - 9
Click for larger image and other views

LENOX Gold 9118G - 9

>> Click here to update Cheapest prices for LENOX Gold 9118G - 9" 18TPI Titanium Edge LAZER Heavy Metal Cutting Reciprocating Blade - 5 Pack <<

LENOX Gold 9118G - 9" 18TPI Titanium Edge LAZER Heavy Metal Cutting Reciprocating Blade - 5 Pack Feature

  • Specifically designed for heavy metal cutting
  • Titanium Edge improves blade's life
  • Bi-Metal Construction
  • Shatter Resistant
  • Cuts Faster


LENOX Gold 9118G - 9" 18TPI Titanium Edge LAZER Heavy Metal Cutting Reciprocating Blade - 5 Pack Overview

Lenox Gold 9118G - 9" 18TPI Titanium Edge LAZER Heavy Metal Cutting Reciprocating Blades - 5 Pack has specially formulated Titanium edge which improves the wear resistance of the teeth for faster cuts through the blade's life. The bi-metal technology flexes, resists breaking and also extends the life of the blade. The reinforced tooth design and Titanium coating combine to create the longest lasting blade, ever.



SAVE NOW on the special offers below!

Available In Stock.

This LENOX Gold 9118G - 9" 18TPI Titanium Edge LAZER Heavy Metal Cutting Reciprocating Blade - 5 Pack ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

LENOX Gold 9118G - 9

Limited Offer Today!! LENOX Gold 9118G - 9" 18TPI Titanium Edge LAZER Heavy Metal Cutting Reciprocating Blade - 5 Pack Black Friday and Cyber Monday Deals

Milk Frother Mclane Mowers 32 Lcd Vizio

Plasma Cutters - The Best Metal Cutting Tool

Plasma cutters are an effective metal cutting tool and with modern technology you can achieve cuts approaching laser accuracy which makes them a great cutting machine. Plasma cutters do not cut through metal using a flame as an oxy acetylene torch does. Instead plasma cutters use a high voltage charge to ionize a high velocity stream of inert gas which changes into plasma when it reaches very high temperatures. The plasma cuts through the metal by melting it with little impact on the surrounding metal and is very precise because of this.

Metal Cutting

It is only in recent years plasma cutters have achieved this level of precision. In earlier years the cutters were less precise and more of a blunt instrument. However recent technology has allowed the development of a smaller more focused flame to give a more accurate neater cut while using lower power. These machines can now be bought for less than US,000. These cutters have an inbuilt air compressor and are idea for a small workshop with enough flexibility to undertake a range of jobs.

Metal Cutting

The most expensive plasma cutters costing in excess of US .500 are more powerful and complex. An example of is Millers AutoArc 4500 with 27 amp power and a strong compressor. This powerful machine can through a half inch thick steel at a reasonable speed. In deciding which model to buy you should match the equipment with your needs. If for instance your usage is for occasional light tasks in a workshop then a lower cost entry level machine is appropriate. On the other hand if you perform work requiring regular use of the equipment then a more robust machine is worth buying. As with all equipment purchases you should spend no more than is necessary to get the job done.

This gives you an overview plasma cutters for more information look for the link in the resource box below.

Plasma Cutters - The Best Metal Cutting Tool
Metal Cutting

Special Price!!! Milwaukee 6370-21 13 Amp 8-Inch Metal Cutting Circular Saw

Oct 22, 2011 09:47:02

Milwaukee 6370-21 13 Amp 8-Inch Metal Cutting Circular Saw
Click for larger image and other views

Milwaukee 6370-21 13 Amp 8-Inch Metal Cutting Circular Saw

>> Click here to update Cheapest prices for Milwaukee 6370-21 13 Amp 8-Inch Metal Cutting Circular Saw <<

Milwaukee 6370-21 13 Amp 8-Inch Metal Cutting Circular Saw Feature

  • Dry-cut technology provides faster, cleaner, more affordable metal cutting
  • Durable blade shield with integral chiptank deflects/collects hot chips and sparks
  • Plunge lever for fast, effective plunge cuts
  • Exclusive quick-release shield latch for fast waste disposal and blade changes
  • Full two-year warranty


Milwaukee 6370-21 13 Amp 8-Inch Metal Cutting Circular Saw Overview

This powerful 13 Amp metal cutting saw features innovative dry-cut technology that provides faster, cleaner, and more affordable metal cutting. It has 120 Volt AC with 3700 RPM no-load speed and an exclusive quick-release blade shield latch as well as sight-line and blade point-of-entry indicators. The blade diameter is 8 inches, and it has 13amps and a 90 degree cutting depth. It has a right-side blade location, and a wrench and a case included.



SAVE NOW on the special offers below!

Available In Stock.

This Milwaukee 6370-21 13 Amp 8-Inch Metal Cutting Circular Saw ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Milwaukee 6370-21 13 Amp 8-Inch Metal Cutting Circular Saw

Limited Offer Today!! Milwaukee 6370-21 13 Amp 8-Inch Metal Cutting Circular Saw Black Friday and Cyber Monday Deals

Construction Stapler Bose System

Freud D1080N Diablo 10-Inch 80 Tooth TCG Non-Ferrous Metal and Plastic Cutting Saw Blade with 5/8-Inch Arbor and PermaShield Coating

Special Price!!! Freud D1080N Diablo 10-Inch 80 Tooth TCG Non-Ferrous Metal and Plastic Cutting Saw Blade with 5/8-Inch Arbor and PermaShield Coating

Oct 21, 2011 13:16:38

Freud D1080N Diablo 10-Inch 80 Tooth TCG Non-Ferrous Metal and Plastic Cutting Saw Blade with 5/8-Inch Arbor and PermaShield Coating
Click for larger image and other views

Freud D1080N Diablo 10-Inch 80 Tooth TCG Non-Ferrous Metal and Plastic Cutting Saw Blade with 5/8-Inch Arbor and PermaShield Coating

>> Click here to update Cheapest prices for Freud D1080N Diablo 10-Inch 80 Tooth TCG Non-Ferrous Metal and Plastic Cutting Saw Blade with 5/8-Inch Arbor and PermaShield Coating <<

Freud D1080N Diablo 10-Inch 80 Tooth TCG Non-Ferrous Metal and Plastic Cutting Saw Blade with 5/8-Inch Arbor and PermaShield Coating Feature

  • Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp
  • Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight
  • Durable micrograin titanium carbide for extreme durability, razor-sharp cuts, and long life
  • Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability
  • Laser cut arbor for accurate blade rotation reducing vibration and premature wear


Freud D1080N Diablo 10-Inch 80 Tooth TCG Non-Ferrous Metal and Plastic Cutting Saw Blade with 5/8-Inch Arbor and PermaShield Coating Overview

Freud D1080N 10" 80T Diablo Non-Ferrous & Plastic Table/Miter Saw Blade These thin kerf blades have a Triple Chip Grind (TCG) Tooth Design for long life and a clean, burr-free finish. Diabloâs unique anti-vibration design and precision-tensioned steel plate provide critical protection against vibration, allowing these blades to cut smoother and quieter.Freud D1080N 10" 80T Diablo Non-Ferrous & Plastic Table/Miter Saw Blade Features:; Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp; Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight; Durable micrograin titanium carbide for extreme durability, razor-sharp cuts, and long life; Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability; Laser cut arbor for accurate blade rotation reducing vibration and premature wear; Table saw/slide miter blade ; Great for non-ferrous/plastic work ; Super thin laser cut kerf ; Perms-SHIELD non-stick coating ; TiCo Hi-density Carbide blade ; 12,000 maximum RPM ; 5/8" arbor ; 80 teeth ; 10" blade diameter ; Carded

Freud D1080N Diablo 10-Inch 80 Tooth TCG Non-Ferrous Metal and Plastic Cutting Saw Blade with 5/8-Inch Arbor and PermaShield Coating Specifications

For a high-impact blade that makes clean cuts in plastics and non-ferrous metals, look no further than the Freud D1080N Diablo 10-Inch Non-Ferrous Metals and Plastics Saw Blade. Thanks to its proprietary TCG (triple-chip grind) teeth, this is your go-to blade for slicing through plastic structures and non-ferrous metals such as copper pipes, aluminum extrusions, and brass plates.




Model #D1080N
Diameter10"
Machine UseMiter/Slide Miter Saw, Table Saw
ApplicationNon-Ferrous Metals/Plastics
Teeth80 TCG
(Triple-Chip Grind)
Arbor5/8"
Kerf.094"
Hook Angle-5°
Makes Clean, Razor-Sharp Cuts in Plastic and Non-Ferrous Metals
Achieving premium results when working with plastics and non-ferrous metals is all about clean, accurate cuts. The Freud D1080N makes this process easy, fast, and precise. Constructed for making flawless crosscuts, this blade's proprietary TCG (triple-chip grind) teeth leave a clean, burr-free finish.

Contractors, construction workers, and avid do-it-yourselfers will want to keep this blade on hand for jobs that call for slicing through plastic structures and non-ferrous metal pipes, extrusions, and plates. Appropriate application materials include copper, aluminum, brass, and plastic.

Produces Smooth, Quiet Cuts with Laser-Cut Kerf
The Freud D1080N's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.094-inch kerf between the blade's 80 TCG (triple-chip grind) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.

An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade's cutting life.

Features Shock-Resistant Carbide for Long-Lasting Precision
So you can count on it over the long term, the Freud D1080N is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion.

Fits Miter and Table Saws
The Freud D1080N is a great addition to your workshop because it's designed with the versatility to fit a variety of table saws and miter saws, including sliding miter saws.

This product is covered by Freud's Limited Lifetime Warranty.

What's in the Box
Freud D1080N Diablo 10-Inch Non-Ferrous Metals and Plastics Saw Blade.


SAVE NOW on the special offers below!

Available In Stock.

This Freud D1080N Diablo 10-Inch 80 Tooth TCG Non-Ferrous Metal and Plastic Cutting Saw Blade with 5/8-Inch Arbor and PermaShield Coating ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Freud D1080N Diablo 10-Inch 80 Tooth TCG Non-Ferrous Metal and Plastic Cutting Saw Blade with 5/8-Inch Arbor and PermaShield Coating

Limited Offer Today!! Freud D1080N Diablo 10-Inch 80 Tooth TCG Non-Ferrous Metal and Plastic Cutting Saw Blade with 5/8-Inch Arbor and PermaShield Coating Black Friday and Cyber Monday Deals

Drill Milwaukee Power Tool Accessories

The Sizzix Big Shot and BigKick Meet the Needs of the Toughest Scrapbooker

Scrapbooking is the form of art of some would say therapy!! Of preserving memories for the generations to come, by collating photographs and memorabilia and placing them together with their story in an album. Each page of an album can be simple, or these days many keen scrapbookers like to embellish their pages and each page becomes a piece of art.

Metal Cutting

One of scrapbookers favourite ways to embellish a scrapbook page is by adding creative titles and images. Since the invention of scrapbooking die cutting machines, scrapbook pages have taken on a new dimensions as die cuts can be now made from various forms of material and in an endless supply of wonderful designs.

Metal Cutting

There are two types of die cut machines on the market. The electronic versions like the Making Memories Slice, Provo Craft Cricut, Xyron Wishblade and the Pazzles. Then there are the manual versions, ie no electronics involved at all like the Sizzix BigKick/Big Shot, Provo Crafts Cuttlebug and Spellbinders Wizard.

The advantages of a manual die cutting machine, is that they are no where near the price of electronic die cutters, they are also more portable and more robust. Their biggest advantage though is the types of materials they will cut. They can cut much thicker materials compared to electronic cutters, like fabric, think sheet metal, cork etc, which is only a dream for owners of an electronic cutter. Their main disadvantages are that they have to be operated manually of course and you can only cut the one size of the cartridge available.

Although the electronic cutters sound fantastic, manual die cutters are still very popular and still have a place in today's scrapbooking die cutting machine market due to their ability to cut through the toughest fabrics. The best of the manual cutting machines range available right now, would have to be the Sizzix BIGkick/ Big Shot (the same machine, just a different design). It is a fabulous machine that has come a long way since the Original Sizzix Machine came out many years ago and led the market to where it is today.

The Sizzix BigKick and Big Shot machines operate with a platform on which the die and paper is laid and when pressure is applied, the die with its sharp, pre cast design, cuts out paper or other types of materials. The new platform and various adaptors that are available, means that any die on the market can be used with the BigKick. This includes other brands, as well as the smaller Sidekick Sizzlits dies. All of the Sizzix range of dies ever made, can be used in this machine.

The BigKick and Big Shot die cutters also have a larger base than the original machine. This means you can put the larger dies in sideways to make cuts quicker. It also fits in larger sheets of paper and basically cut more out at once. A new range of larger dies, which make fantastic backgrounds, has also been created for the machine. Also, if you own a lot of smaller dies, you can now cut out multiple smaller die cuts at once.

One of the best new features of the Big Shot is the rolling mechanism. This is absolutely the best feature compared to the original machine. It means no more having to slide the large dies through in multiple sections, like the original Sizzix, to get the shape cut out. No slippages, or having part of the die cut but part not, due to not enough pressure. Also, it saves a lot of the muscle work that was required by the press down handle of the old machine. I just love the crunching sound it makes as it cuts!

The Big Shot can also cut the same thicker cardstock and materials that the original sizzix cuts, like cork, cardstock, multiple paper sheets, fabric, felt etc. So with the new wider base and rolling handle, it means you can churn out great letters, titles and images from an amazing range of materials which no electronic die cutter can do. So if you like texture and variety on your scrapbook pages, the Sizzix BigKick or Big Shot are the best in the market.

The Sizzix Big Shot and BigKick Meet the Needs of the Toughest Scrapbooker
Metal Cutting

Special Price!!! Freud D0748F Diablo Steel Demon 7-1/4 48 Tooth TCG Ferrous Metal Cutting Saw Blade with 5/8-Inch Arbor, Diamond Knockout, and PermaShield Coating

Oct 20, 2011 12:22:32

Freud D0748F Diablo Steel Demon 7-1/4 48 Tooth TCG Ferrous Metal Cutting Saw Blade with 5/8-Inch Arbor, Diamond Knockout, and PermaShield Coating
Click for larger image and other views

Freud D0748F Diablo Steel Demon 7-1/4 48 Tooth TCG Ferrous Metal Cutting Saw Blade with 5/8-Inch Arbor, Diamond Knockout, and PermaShield Coating

>> Click here to update Cheapest prices for Freud D0748F Diablo Steel Demon 7-1/4 48 Tooth TCG Ferrous Metal Cutting Saw Blade with 5/8-Inch Arbor, Diamond Knockout, and PermaShield Coating <<

Freud D0748F Diablo Steel Demon 7-1/4 48 Tooth TCG Ferrous Metal Cutting Saw Blade with 5/8-Inch Arbor, Diamond Knockout, and PermaShield Coating Feature

  • Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp
  • Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight
  • Durable micrograin titanium carbide for extreme durability, razor-sharp cuts, and long life
  • Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability
  • Laser cut arbor for accurate blade rotation reducing vibration and premature wear


Freud D0748F Diablo Steel Demon 7-1/4 48 Tooth TCG Ferrous Metal Cutting Saw Blade with 5/8-Inch Arbor, Diamond Knockout, and PermaShield Coating Overview

Steel Demon. Ideal for cutting steel studs, steel pipe, and steel sheet. For most mild steels under 1 4". Super thin laser cut kerf (small diameter blades only) provides faster, cleaner, more exacting cuts. Perma Shield coating shields blade against heat,

Freud D0748F Diablo Steel Demon 7-1/4 48 Tooth TCG Ferrous Metal Cutting Saw Blade with 5/8-Inch Arbor, Diamond Knockout, and PermaShield Coating Specifications

For a super high-impact blade that powers through ferrous metals with clean, burr-free cuts, look no further than the Freud D0748F Diablo 7.25-Inch Ferrous Metals Saw Blade. This is your go-to blade for slicing through ferrous metal components such as steel sheets and piping with smooth, non-abrasive accuracy. For strong, long-lasting resistance, the pre-tensioned blade features Triple Chip Grind technology and high-density carbide tips.




Model #D0748F
Diameter7-1/4" (182mm)
Machine UseCircular Saw
ApplicationFerrous Metals
(mild steel under 1/8" thick)
Teeth48 TCG
(Triple-Chip Grind)
Arbor5/8"
(Diamond knockout arbor)
Kerf.102"
Hook Angle
Makes Clean, Burr-Free Cuts in Ferrous Metals
Achieving premium results when working with ferrous metals is all about making precise cuts with clean, flat edging. The Freud D0748F makes this process easy, fast, and precise. This blade is expertly constructed with TCG (triple-chip grind) teeth protected by a special carbide blend, designed to deliver outstanding resistance to the powerful impacts of steel cutting.

Contractors, steel erectors, HVAC installers, and other steel fabricators will want to keep this blade on hand for all jobs that call for cutting ferrous metal components that measure 1/8-inch thick or thinner, such as steel studs, sheets, and piping.

(Note: this blade is for mild steel only.)

Produces Smooth, Quiet Cuts with Laser-Cut Kerf
The Freud D0748F's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.102-inch kerf between the blade's 48 TCG (triple-chip grind) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.

An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction to the blade, helping extend its cutting life.

Features Shock-Resistant Carbide for Long-Lasting Precision
So you can count on it over the long term, the Freud D0748F is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide.

The blade owes its robust performance to its premium-grade steel, which is hardened to HRC 48 for an optimum level of durability. And protecting the blade is a Perma-Shield Non-Stick Coating, which provides resistance to heat and corrosion.

Fits Circular Saws
The Freud D0748F is a great addition to your workshop because it is designed with the versatility to fit a variety of circular saws.

This product is covered by Freud's Limited Lifetime Warranty.

What's in the Box
Freud D0748F Diablo 7.25-Inch Ferrous Metals Saw Blade.





SAVE NOW on the special offers below!

Available In Stock.

This Freud D0748F Diablo Steel Demon 7-1/4 48 Tooth TCG Ferrous Metal Cutting Saw Blade with 5/8-Inch Arbor, Diamond Knockout, and PermaShield Coating ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Freud D0748F Diablo Steel Demon 7-1/4 48 Tooth TCG Ferrous Metal Cutting Saw Blade with 5/8-Inch Arbor, Diamond Knockout, and PermaShield Coating

Limited Offer Today!! Freud D0748F Diablo Steel Demon 7-1/4 48 Tooth TCG Ferrous Metal Cutting Saw Blade with 5/8-Inch Arbor, Diamond Knockout, and PermaShield Coating Black Friday and Cyber Monday Deals

Electronic Organizers Airpanel V110 Battery Convertible Tablet Netbook